Manufacturing method of alloy stamping forming process
发布时间：
2020-06-09
The current production of valve plates mainly includes organic processing and stamping. In these two solutions, the stamping process is more commonly used. The principle is to use ordinary stamping technology to stamp, squeeze the valve slot
The current production of valve plates mainly includes organic processing and stamping. In these two solutions, the stamping process is more commonly used. The principle is to use ordinary stamping technology to stamp, squeeze the valve slot, punching and blanking. This process is divided and realized separately by a single process mold. This solution usually requires the final formation of 3-5 sets of molds. Products produced using this scheme will have problems such as the shape, size and concentricity of the valve wire groove, the difference in product flatness and the relative accuracy of the relative position of the hole groove. This procedure is a single process operation, multiple positioning, discontinuous operation, time-consuming, more molds, more mold replacements, labor, equipment, construction site costs, low product quality, poor consistency, etc., making the production program a kind of Relatively backward production plan.
Therefore, how to realize a method that can complete the valve plate stamping at one time to reduce part processing procedures and improve quality, thereby reducing raw material costs, mold costs, equipment operating costs, logistics and quality control costs, and achieve mass production. Large quantities, high efficiency, and continuous economic production have become urgent problems in this field.
实时资讯
